Step by Step Drive Test and Post Processing Using TEMS and MAPINFO
In general, Drive Test can be define as a methode that used to verify the actual condition of RF signal certain operator (excelcomindo, telkomsel, indosat, mobile8) at certain place.
Several functions of drive test :
- Analyzing customer complaint of certain operator in their home or office area
- Finding problem in BTS ( Timeslot Check, TRX Check, Swap Feeder)
- Analyzing the result of optimization process (continuity and all of area)
There are softwares can be used for drivetest that installed on laptop. TEMS Investigation (Ericsson), NEMO (Nokia).
Here the steps to start learning drivetest with TEMS Investigation :
1. Drive Test Equipments
2. Laptop Configurations
3. TEMS Investigation :
- Workspace Configurations
- Map Configurations
- Port Equipment Configurations
- Command Sequence Configurations
4. Go Drive Test !!!
5. Logfile Checking
6. Post Processing :
- Report Generator
- MapInfo (Plot IEs)
7. Trouble Shooting :
- 2G Frequency Scanning
- Time Slot Check
- TRX Check
- Swap Feeder Check
CDMA Drive Test and Optimization (new)
Sumber : orinaica-wordpress
Back to GSM Menu